1. Pengolahan Poliolefin:

Compatible with LDPE, HDPE, LLDPE, PP (homopolymer/copolymer), etc., inhibiting thermo-oxidative degradation in high-temperature processes such as extrusion, injection molding, and blow molding, maintaining the mechanical properties and appearance of products. For agricultural films, pipes, injection molded parts, etc., the dosage is 0.05%-0.2%. The effect is even better when compounded with antioxidant 168.

2. General-Purpose Plastics and Engineering Plastics:

Used in PS, ABS, AS, PC, PA, POM, PBT, PET, etc., preventing oxidation discoloration and performance degradation during processing and use. Suitable for appliance housings, automotive parts, etc., the dosage is 0.1%-0.5%, especially suitable for white/light-colored products.

3. Synthetic Rubber and Elastomers:

Used in natural rubber and synthetic rubbers such as styrene-butadiene rubber, nitrile rubber, butadiene rubber, chloroprene rubber, and polyurethane to inhibit thermo-oxidative aging, improve the heat and weather resistance of vulcanized rubber, and prevent cracking and loss of elasticity. Usage in seals, conveyor belts, tires, etc.: 0.1%-1.0%.

4. Food Contact Materials:

Used in food contact films, containers, bottle caps, etc., such as PE and PP, to prevent packaging aging and prevent food contamination. Usage: 0.05%-0.3%.

5. Petrochemicals and Oils:

As an antioxidant additive in lubricating oils, hydraulic oils, transformer oils, fuel oils, etc., to inhibit oxidative rancidity, viscosity increase, and gum formation, extending service life. Recommended usage in transformer oil: approximately 0.3%.

6. Synthetic Fibers and Textiles:

Used in synthetic fibers such as polyester, nylon, and polyacrylonitrile to prevent thermo-oxidative degradation during spinning and post-processing, maintaining fiber strength and whiteness. Usage: 0.05%-0.3%.

7. Perekat dan Sealant:

Used in epoxy, polyurethane, acrylic, and other adhesives and sealants to prevent oxidation during curing and use, improve bond strength and aging resistance, suitable for construction, automotive, and other fields. Dosage: 0.1%-0.5%.

8. Coatings and Inks:

Added to solvent-based coatings, powder coatings, and oil-based inks to inhibit resin and pigment oxidation, prevent discoloration, loss of gloss, and sedimentation, and extend storage and service life. Dosage: 0.05%-0.3%.

9. Oils and Feed:

Used in edible oils and oils for frying foods to delay oxidative rancidity according to standards; also used in feed to protect vitamins and oils.